industrial burners

Accutherm has an extensive range of industrial burners available for a wide range of different industries and applications to do

Riello BP D.O Dual Fuel Burner

Riello Riello BP D.O Dual Fuel Burner
The BP D.O. DUAL 3 burner series is a forced-air design with pneumatic atomization. The dual fuel operation is suitable with natural gas, LPG, lean gas or gases with low calorific value (on request) with a light oil such as diesel...

Maxon OXY-THERM LE Gas Burner

Maxon Maxon OXY-THERM LE Gas Burner
OXY-THERM LE Gas Burners provide the lowest NOx levels of any industrial oxygen/fuel burner, regardless of oxygen purity. NOx levels are up to 70% lower than conventional oxy-gas burners and up to 50% lower than conventional oxy-oil burners. OXY...

Maxon MG Mixing Tubes

Maxon Maxon MG Mixing Tubes
Maxon's MG series provides Air/fuel gas mixing suitable for use with all MAXON burner systems to provide thorough blending of air/gas mixture. ...

Maxon TUBE-O-FLAME Burner

Maxon Maxon TUBE-O-FLAME Burner
MAXON's TUBE-O-FLAME industrial burner range provides clean, low NOx heating for tube firing. The series burns most fuel gases inside an array of tubes to provide reduced fuel consumption and better process response. The low horsepower requi...

Maxon HC AIRFLO In-Duct Firing Line Burner

Maxon Maxon HC AIRFLO In-Duct Firing Line Burner
Maxon's HC AIRFLO Duct Burner series provide a low NOx operation in fresh and re-circulating industrial air heating applications. The series can operate in a process air stream with 12% or less oxygen content for optimal effic...

Maxon NP & RG AIRFLO In-Duct Firing Line Burner

Maxon Maxon NP & RG AIRFLO In-Duct Firing Line Burner
For direct fired fresh air heating applications Burns clean and odor-free with most gaseous fuels, meeting or exceeding most known standards for direct-fired make-up air and space-heating applications High turndown, up to 25 : 1 Modular design config...

Maxon LINOFLAME Burner

Maxon Maxon LINOFLAME Burner
LINOFLAME Industrial Burners produce short, ribbon-type flames by modular-designed section with customised drillings. Our "VF" model are cast iron, V-faced, modular sections incorporating standardised drillings for interchangeability. ...

Maxon LG Mixing Tubes

Maxon Maxon LG Mixing Tubes
LG Mixing Tubes provide thorough blending of the air/gas mixture for all Maxon premix industrial burner systems. Most clean, low pressure gases may be used. When combined with a combustion air blower and MAXON MICRO-RATIO® flow control valve...

PeriFlame MD-G-RK Burner

PeriFlame PeriFlame MD-G-RK Burner
Periflame’s new generation MD-G-RK industrial burners for rotary kilns have a wide range of adjustments and flame stability options. The peripheral circular flame holder, central flame holder, central gas nozzle and modular outle...

Maxon VENTITE Inspirator Mixers

Maxon Maxon VENTITE Inspirator Mixers
VENTITE Inspirators provide a low-cost means of supplying air/gas mixture to premix-type gas burners. Gaseous fuel under high pressure is introduced through a drilled spud orifice into the venturi throat, pulling in a proportional amount of comb...

1 2 3 4 5 6 7 8 9 next