TPITPI 100-EZ Multimeter

TPI 100-EZ Multimeter

TPI 100-EZ is simple to use, no more guessing what function to switch your multimeter to the 100-EZ does it automatically. 

Automatically switches between ACV, DCV, and ohms (resistance). Benefit: Simple to use. Meter selects function and range, just connect the leads to the device under test.

Single button operation. Benefit: Easy to use. Enables users with limited knowledge to perform tests safely.

0 to 600 volts AC and DC. Benefit: Enough range to safely perform measurements.

10 MΩ internal impedance. Benefit: High impedance prevents inaccurate reading caused by circuit loading.

Auto power off. Benefit: Increases battery life by turning off the multimeter when not in use.

4,000 count display

Up to 40MΩ

cULus 61010-1

CAT II – 1000V, CAT III – 600V

View Photos
TPI 100-EZ Multimeter

  • EZ to use one button operation
  • Automatically Measures DC Volts, AC Volts and Ohms (Resistance)
  • Large 4,000 Count Display
  • 0 to 600 Volts AC and DC
  • 10M Ohm impedance
  • Auto Power Off After 10 Minutes
  • Includes Test Lead Set, Batteries and Protective Rubber Boot


  • 100 Instrument
  • Rubber Boot
  • Test Lead Set
  • Instruction Manual
  • 1.5V Battery

DC Volts  Maximum Input: 600V (Minimum Input = 1.5V)

 Maximum Resolution: 0.001V

 Accuracy: +/-0.5%

 AC Volts  Maximum Input: 600V (Minimum Input = 1.7V)

 Maximum Resolution: 0.1V

 Accuracy: +/-0.8%

 DC Amps  N/A
 AC Amps  N/A
 Resistance (Ohms)  Maximum Input: 40MΩ

 Maximum Resolution: 0.1Ω

 Accuracy: +/-0.8%

 Frequency  N/A
 Capacitance  N/A
 Inductance  N/A

 (K-Type Thermocouple)

 Continuity  Audible at less than 100Ω
 Diode  N/A
 Duty Cycle  N/A
 True RMS Responding  No
 Conductance  No
 Pulse Width  No
 Data Hold  No
 Min/Max Record  No
 Time Stamp Logging  No
 Relative Mode  No
 Compare Mode  No
 RS-232 Output  No
 Process Loop Output  No
 Sleep Mode / Auto Off  No
 Protective Boot  Yes (standard)
 Display Type  4000 count LCD
 Range Selection  Auto including function selection
 Operating Temperature  32°F to 104°F (0°C to 40°C)
 Storage Temperature  14°F to 122°F (-10°C to 50°C)
 Humidity  80% non-condensing
 Size  6” x 3.1” x 1.2” (187mm x 86mm x 33mm) with boot
 Weight  12oz (340g) with boot
 Battery Type  1.5V “AA” Alkaline (2)
 Battery Life  500hrs Typical
 OverInput Category  CAT III 600V
 Agency Approval  IEC 61010-1

  • Measure line and control circuit voltages
  • Measure resistance of motor windings, transformers, and solenoids
  • Make general AC and DC voltage and resistance measurements
  • Measure the resistance of elements and electric heater cores
  • Test continuity of wiring
  • Verify voltage at breakers and outlets
  • Use as a backup meter in your toolbox

Enquire Now
 Subscribe to newsletter